ECO-SHOCK is a revolutionary dry pump accessory that can dramatically reduce power consumption by attaching to the dry pump exhaust line.
|Power supply||Voltage, frequency, phase||100 to 220 VAC, 50 / 60 Hz, single-phase|
|Power consumption||65W（Reading when pressure is at ultimate puressure,
and gas for shaft seal and gas ballast are 0 Pa・m3/s）
|Control||Input||Remote start / stop (DC 24V contact with voltage)
Non-voltage contact with contact capacity of 2.0 A Min. required
|Output||Overcurrent alarm output (non-voltage contact)
Contact capacity : DC 24V, 1.0 A
|Operation||Manual start switch|
|Display||Display of operation time|
|Weight||Eco-Shock：8.3kg Valve unit：800g|
|Connection||Connection port||G1/4″ (INLET、OUTLET) The connector has been installed.|
|Recommended piping||Φ : 6.53 mm Min.
Length : 3 m Max.
|Evacuation speed *1||1300L/min||2100L/min||3980L/min|
|Measured power consumption
with ECO-SHOCK attached *2 *3 *4
|Power reduction rate||67%||72%||76%|
*1 At 60Hz power.
*2 Power consumption at ultimate pressure.
*3 Including power consumption of ECO-SHOCK.
*4 Reading at ultimate pressure, with shaft seal and gas ballast at 0Pa・m3/s. These valves change slightly depending on the gas flow at ballast and shaft seal.