Display Unit ISG1 Series

Transducer Type Display Unit

Display Unit ISG1 Series

This single channel vacuum gauge display is compatible with all G-TRAN series and CCM series sensors. Enables users to view system status at a glance.




Connectable sensor units1 unit
Compatible sensor unit

G-TRAN Series

Atmospheric range pirani gauge SW1 Pirani gauge SP1 / BPR2 Hot cathode gauge BMR2 Cold cathode gauge SC1 Multi ionization gauge SH2 Ceramic capacitance manometer CCMT-D

Display Significand: 2 digit, Exponent: 1 digit digital □.□×10□
RangeDepends on each sensor unit’s pressure range
Update time200ms
Accuracy±2%±1 digit respect to pressure value from measurement unit (CCM series:±4% digit at below 1/10 of full scale)
Data output DC 0 to 10V simulatied Log output, Log, linear output *Note: Output differs among each unit
Update time70ms
Accuracy±10mV respect to pressure value converted to voltage
Sampling time70ms running average in 5 times
Control input signalOpen collector input, negative logic
Filament lighting signal, Atmosphere pressure adjustment etc.
Set point 1, 2, 3
Control output signalOpen collector output, Negative logic [[rating: 30VMAX、50mAWAX、70mW]
Error signal, Filament lighting signal etc.
Set point 1, 2, 3
Serial communication typeRS-485
Power voltageDC24V±1V Ripple, noise less than 1%
Current consumption2W (Display unit only) *other connected unit’s consumption will be added
Input/output connectorSensor connector: D-sub15-socket (M2.6 screw)
I/O connector: D-sub15-pin (M2.6 screw)
Power supply connector: PHOENIX: MSTB 2, 5/3-STF, 08
Operating temperature range10 to 40?C (50 to 104?F)
Operating humidity range15 to 80% (not condensing)
Dimension W×D×HDIN 48mm×70mm×96mm (JIS rack size 50mm×70mm×100mm is also available)
AccessoriesPower supply connector: PHOENIX: MSTB 2, 5/3-STF-5, 08 1pc
DIN panel fixture: Fixture brackets 2pc
Instruction manual: Standard paper 1pc
OptionSensor connectors: D-sub15-pin (M2.6 screw) 1pc
I/O connector: D-sub15-socket (M2.6 screw) 1pc
Applicable standardCE