Vacuum Induction Melting Furnaces FMI Series,Magcaster Series

Vacuum Induction Melting Furnaces

FMI Series、Magcaster Series

Since the first unit was produced in 1957, ULVAC has delivered over 200 vacuum induction melting furnaces to customers in Japan and around the world. These furnaces are contributing to a wide range of industry applications such as specialized steel, electronics materials and new materials. They have been used in developing new technologies such as high-vacuum degassing and refining using cryopanels, and multi-element alloys created by single-direction agitation systems. ULVAC can also provide equipment lines and production technology for rare-earth magnet manufacturing.

features

  • Cryopanels create outstanding degassing effect.
  • Large volumes of activated metal can be added and controlled.
  • Outstanding ingot cleaning
  • Single-direction agitation creates outstanding component uniformity
  • Rapid heating, for outstanding operability
  • Selectable casting type:black and strip casting

Applications

  • Fe-base alloys : Mechanical tools (hob cutters, pinions, cutting tools), dies, bearing steel
  • Rare-earth metals : Magnets (Nd-Fe-B, Sm-Co)
  • Ti alloys : Shape-memory alloys, hydrogen-absorbing alloys
  • Precious metals: Bonding wires, Au, Pt, thermocouples, electric contact materials, dental products, ornaments
  • Ni-base alloys : Heat-resistant steel, corrosion-resistant materials, electrical part materials, permalloys
  • Al : Bonding wires, lead frames, sputter targets
  • Cu : Electric contact materials, lead frames
  • Cr : Sputter targets

specifications

ModelFMI-1 (batch type)
Melted materialsIron, nickel, iron-base alloys or nickel-base alloys
Standard melting volume5Kg to 100kg
Output/frequency25kW/10kHz to 100, kW/1kHz
Standard time until melting (thermal furnaces)30 to 60 minutes
Pressure after melting (standard)1.3×10-1Pa(10-3Torr)
Power supply for melting (3φ, 440 V, 50/60 Hz)About 25 to 120 kVA
Operation power supply (3φ, 200/220 V, 50/60 Hz)About 10 to 25 kVA
Cooling water (0.3 MPaG (3 kg/cm2G))About 3 to 12 tons/hour
Compressed air (0.6 MPaG (6 kg/cm2G))Some
Installation area6 x 5 x 3 to 7 x 7 x 5 (L x W x H; m)

 

ModelFMI-2(semi-continuous type)
Melted materialsIron, nickel, iron-base alloys or nickel-base alloys
Standard melting volume100Kg to 1000Kg
Output/frequency100kW/1kHz to 500kW/500kHz
Standard time until melting (thermal furnaces)60 to 120 minutes
Pressure after melting (standard)1.3 x 10-1Pa(10-3Torr)
Power supply for melting (3 f, 440 V, 50/60 Hz)About 120 to 800 kVA
Operation power supply (3f, 200/220 V, 50/60 Hz)About 30 to 160 kVA
Cooling water (0.3 MPaG (3 kg/cm2G))About 15 to 35 tons/hour
Compressed air (0.6 MPaG (6 kg/cm2G))About 10 to 20 liters/minute
Installation area11 x 8 x 5 to 17 x 14 x 8 (L x W x H; m)
Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on pinterest
Pinterest
Share on email
Email
Share on print
Print